Chemicals, Lubricants & Paints

Single Roll Hydrion Quat Check Test Paper provides a simple, reliable, and economical means to measure the concentration of Quaternary Sanitizers, specifically Alkyldimethylbenzyl ammonium compounds, Rocall II, and Hyamine 3500. The Color matches within the Hi Range cocentration at 0-200-400-600-800-1000ppm (parts per million). Test kit is used for detecting exhaustion of solutions that should be replaced as well as helping to avoid using excessive amounts of sanitizing agents.
Federal, State and Local health regulations require users of Quaternary Ammonium Sanitizer Solutions to have appropriate test kits available to verify the strength of sanitizer solutions. Sanitizer solutions are essential in the food service industry to ensure that sanitizers are at the proper concentration specified by the individual manufacturer.
Each carton contains 10 kits, each consisting of one (1)15-foot roll of test paper and matching color chart. Provides for approximately 150 tests per roll.

The Cooler is a general purpose multi-duty synthetic chemical coolant for use on cast iron, ductile iron and most other metals. The Cooler leaves a completely water-resoluble rust-preventative film on machine and parts. No gummy, sticky, tacky residue to tie up machine, which creates excessive maintenance costs and also will contribute to excessive bacterial growth. Formulated with a unique blend of wetting agents, The Cooler rejects tramp oil emulsification providing for easy removal of this contaminant through skimming, centrifugation, or other appropriate means. The Cooler contains unique corrosion inhibitors providing corrosion and stain protection on cast iron, steel, aluminum, brass, copper and most modern alloys.

Lube-All is a high tech lubricant enhanced with zonyl® PTFE Resin. It maintains longer lubricity and wear resistance, restoring smooth operation to sticky or rusty mechanisms without disassembling. Quick penetrating action through the smallest cracks and crevices, provides a protective barrier against corrosive environments. Use on fasteners, tools, sliding doors, locks, hinges, window cranks, cables, chains, electronic gears, electrical tools, and automobile starters.

The Cutter is a multi-functional soluble oil-based fluid designed for most machining and/or grinding operations. The Cutter contains superior corrosion inhibitors to protect galvanized parts, steel, aluminum, brass, copper, their alloys, and the modern space-age alloys of today. The Cutter formulation contains an odor-killing component to control odors and eliminate slime build-up on machine surfaces and in coolant systems. Use of The Cutter reduces rancidity problems and greatly increases the life of the coolant virtually eliminating down time due to operator complaints and other associated problems with a spoiled, rancid coolant.The Cutter leaves a non-sticky, free-flowing water re-emulsifiable corrosion protective film on both machine and parts. No sticky, gummy, tacky build-up to tie up machines or aid in bacterial growth.

SynSpar GP is a medium to heavy duty, dye, perfume and oil free multi-function synthetic coolant for use on ferrous and nonferrous metals. SynSpar GP offers long term in-tank stability providing longevity and machine performance. Incorporating a unique blend of raw materials into the formulation of SynSpar GP, provides excellent tool life and surface finish qualities previously known only to chlorine and/or sulfur containing products. Tool steels, carbon steel, stainless steel, copper, brass, cast iron and some of the space age alloy type metals have all been run with SynSpar.

New Generation Epoxy Patch and Repair Kit is a 2-part industrial concrete repair system recommended to fill large holes, cracks, spalls, voids, other surface defects, to install anchor bolts, posts poles and as a polymer grout. With excellent adhesion, New Generation Epoxy Patch and Repair Kit is great for super tough, speedy repairs and will cure faster and stronger than concrete.

The Grinder is a pure synthetic fluid designed for high-speed grinding operations on most metals. The non-foaming formulation of The Grinder eliminates foaming and misting problems on all high-speed grinding operations. Formulated with high-quality raw materials, The Grinder provides excellent rancidity and slime control. When used at the proper concentration, The Grinder eliminates foul odor problems associated with spoiled coolants in manufacturing plants. The Grinder works extremely well with diatomaceous earth, positive media, cyclonic and settling type filtration units.

Medium-viscosity silicone spray is designed specifically for food- and textile-industry applications. Ultra-fast drying film provides light lubrication for a wide variety of materials. Fan-spray pattern minimizes the potential for overspray. Colorless, odorless and nonstaining formula ensures safe, unobtrusive use. Application: Appliances; Bolts; Cutting Tables; Foodservice; Ice Machines; Machinery; Moving Parts; Applicable Material: Fabric; Foam; Glass; Metal; Plastic; Rubber; Vinyl; Wood; Chemical Compound: Silicone; Capacity (Volume): 11 oz.

Cutter EXP HW is a multi-functional soluble oil-based product designed to be diluted with hard water to perform heavy, medium and light duty machining and grinding operations. Cutter EXP HW offers extended long-term in-tank stability providing maximum longevity and machine performance.

The Cooler is a general purpose multi-duty synthetic chemical coolant for use on cast iron, ductile iron and most other metals. The Cooler leaves a completely water-resoluble rust-preventative film on machine and parts. No gummy, sticky, tacky residue to tie up machine, which creates excessive maintenance costs and also will contribute to excessive bacterial growth. Formulated with a unique blend of wetting agents, The Cooler rejects tramp oil emulsification providing for easy removal of this contaminant through skimming, centrifugation, or other appropriate means. The Cooler contains unique corrosion inhibitors providing corrosion and stain protection on cast iron, steel, aluminum, brass, copper and most modern alloys.

Reduces friction between moving parts. Helps prevent rust. Use on saws, cutlery, grinders, slicers, and other food equipment. Easy to use—spray a light coating directly onto metal surface or apply to clean cloth and wipe onto surface. Approved for use on food contact surfaces. Application: Tools; Cutlery; Food Preparation Equipment; Capacity (Volume): 32 oz; Packing Type: Spray Bottle.

The Ultra High II Free Chlorine water quality test strips have a very high range of detection with our patented Free Chlorine indicator. Designed to resist interference from monochloramines, SenSafe™Ultra High II Free Chlorine is the ideal product when testing in a food processing environment. Ultra High Free Chlorine is perfect for determining whether or not you have the correct amount of sanitizer present. All of the reagents are impregnated on the test strip pad, and no external chemicals are needed to perform the water quality test.